Precise Light Control

The strobe mode controllers are microprocessor based and specially designed to control all types of LATAB lighting heads. Like the lighting heads they are designed in a black aluminium housing. The controller is enabled for plug and play. Just connect the LATAB lighting head and the controller automatically identifies the lighting type by an electronic sensor and gives the maximum light intensity to the lighting head. The strobe pulse is adjustable in 16 steps. The light intensity can also be adjusted. Increasing the light intensity up to 200 % at 50 and 100 µsec strobes can be selected by internal jumper. The controllers are supplied with 5 m power/ trigger cable by default.

Order numbers

Art. no.

Intensity control modeOutputNumber of channelsTrigger delayManual

PAD1 1131/8

Internal potentiometer8 A1 PDF

PAD1 1131/24

Internal potentiometer24 A1 PDF

PAD1 1141/8

0 – 10 V8 A1 PDF

PAD1 1231/8

Internal potentiometer8 A / chan.2 PDF

PAD1 1431/8

Internal potentiometer8 A / chan.4 PDF

PAD1 1132/8

RS-2328 A1YesPDF

PAD1 1132/24

RS-23224 A1YesPDF

PAD1 1432/8

RS-2328 A / chan.4YesPDF

PAD1 4132/8

Ethernet8 A1YesPDF

PAD1 4132/24

Ethernet24 A1YesPDF

PAD1 4232/8

Ethernet8 A / chan.2YesPDF

PAD1 4432/8

Ethernet8 A / chan.4YesPDF


General specifications


Supply voltage

24 VDC +/– 10 %

Power output

max. 8 A / 24 A

Light intensity

0 – 100 % internal potentiometer

Strobe pulse

50 – 1500 µsec in 16 steps

Trigger input

5 – 24 V, optically isolated

Trigger frequency

max. 200 Hz

Operation temperature

0 – 65 °C

Your PolyXpert in Machine Vision