动态应力应变测量
Optical Measurement of Dynamic Stress and Strain
Optical Measurement of Dynamic Stress and Strain
Understanding the origin of the stress and strain distribution is crucial to increasing the durability of components under dynamic load. Numerical simulations based on finite element (FE) models help with this understanding but must be validated by real component data. Polytec’s 3D Scanning Laser-Doppler Vibrometer with Strain Processor provides an advanced, non-contact optical test solution.
The package of Strain Processor in combination with a PSV-3D Scanning Vibrometers allow a non-contact, optical measuring alternative for dynamic stress and strain distribution and Finite Element model updates.
The Scanning Vibrometer makes a series of non-contact deflection measurements on a predefined grid using the laser probe to characterize strain at each point instead of attaching individual strain gauges. Thus, the test set-up is fast and very repeatable with no mass loading from an attached transducer. Tests are fast and avoid the high cost of preparing and instrumenting the sample with strain gauges.
- Non-contact strain measurement revealing the true strain distribution
- Quick setup and fast results
- No mass-loading, stiffening and damping
- High spatial resolution to measure local strain at no additional cost
- Variable field-of-view for different object sizes
- Measure using arbitrary points or FEM geometry for model validation
- Full-field method: direct visual comparison to FE results

相关产品

PSV-500-3D 三维扫描式激光测振仪
在产品开发中,3D 扫描式激光测振仪能可靠、精确地完成振动测量任务。3D系统输出的振型和本征模式,有助于解决从 NVH、声学和结构动力学到超声波分析、FEM验证和无损测试的一切问题。

RoboVib®
RoboVib®自动测振站将3D 全场扫描式激光测振仪和工业机器人相结合,可完成从复杂部件到完整车身的一切测量。测量所需时间和误差源显著减少,这尤其表现在实验模态分析中。因此,您可以在例如一两天的时间内全部完成车身测试,而在这之前,光准备工作都需要几个星期。