动态应力应变测量

Optical Measurement of Dynamic Stress and Strain

Optical Measurement of Dynamic Stress and Strain

Understanding the origin of the stress and strain distribution is crucial to increasing the durability of components under dynamic load. Numerical simulations based on finite element (FE) models help with this understanding but must be validated by real component data. Polytec’s 3D Scanning Laser-Doppler Vibrometer with Strain Processor provides an advanced, non-contact optical test solution.

The package of Strain Processor in combination with a PSV-3D Scanning Vibrometers allow a non-contact, optical measuring alternative for dynamic stress and strain distribution and Finite Element model updates.

The Scanning Vibrometer makes a series of non-contact deflection measurements on a predefined grid using the laser probe to characterize strain at each point instead of attaching individual strain gauges. Thus, the test set-up is fast and very repeatable with no mass loading from an attached transducer. Tests are fast and avoid the high cost of preparing and instrumenting the sample with strain gauges.

相关产品

PSV-500 Scanning Vibrometer

PSV-500扫描式激光测振仪

全场扫描式激光测振仪为客户提供了一个灵活且可随时扩展的平台,以便客户能快速直观地完成最具挑战性的测量任务,轻松获取振型和本征模式。

PSV-500-3D Scanning Vibrometer von Polytec

PSV-500-3D 三维扫描式激光测振仪

在产品开发中,3D 扫描式激光测振仪能可靠、精确地完成振动测量任务。3D系统输出的振型和本征模式,有助于解决从 NVH、声学和结构动力学到超声波分析、FEM验证和无损测试的一切问题。

RoboVib© Test Center bestehend aus Roboter und PSV Scanning Vibrometer

RoboVib®

RoboVib®自动测振站将3D 全场扫描式激光测振仪和工业机器人相结合,可完成从复杂部件到完整车身的一切测量。测量所需时间和误差源显著减少,这尤其表现在实验模态分析中。因此,您可以在例如一两天的时间内全部完成车身测试,而在这之前,光准备工作都需要几个星期。