Industrial Quality & Process Control
Optimize Production Processes and Product Quality with Optical Metrology
Optical metrology is easy to integrate into existing processes, since there is no contact made during the inspection. In real time, optical metrology can deliver decisive measurement values that are required to identify defective components or to correct critical process parameters. Depending on the measurement task, engineers can choose a suitable tool from Polytec’s arsenal of optical measurement and sensor systems.
"We are using laservibrometers for the vibration measurement since the mid 1990s. We started with a Polytec CLV then switched to the IVS-200 and later to ist successor IVS-400 industrial vibrometer. The Polytec vibromters proved their worth, especially when the measurement points are hard to access or a high capture bandwidth is needed in the automated production."
Dipl.-Ing. Olaf Strama, director of Industrial & Automotive Solutions (IAS) at MEDAV
By capturing meaningful vibration signatures, laser vibrometers allow conclusions to be drawn on defective components or those prone to defects and supply information on product quality.
More about Acoustic Quality Control >>
Length and Velocity Metrology
Polytec’s Laser Surface Velocimeters provide precise measurements necessary to ensure the dimensional accuracy of metallurgical and rolling mill products.
More about Industrial Length and Speed Control >>
Topography measurement systems, such as the TopMap family from Polytec, monitor critical tolerances of functional surfaces in the process cycle.
More about 3-D Surface Profiling >>
For incoming goods and end-product inspection as well as for production process control, Spectral Analytics provides qualitative or quantitative chemical analysis in real time.
More about Process Analytics >>
In Europe, Polytec offers a full range of machine vision hardware and provides application and feasibility studies to solve complex illumination and image acquisition problems.
More about Machine Vision >>