|
|
Power requirements |
100 VAC - 240 VAC, 50/60 Hz, 100 W (max.) |
|
Operating temperature |
10 °C - 40 °C |
|
Dimensions |
450 mm x 360 mm x 145 mm (19" case) |
|
VFD-Display |
Velocity, length, status messages |
|
Display units |
m/s; m/min; m or ft/s; ft/min; feet |
|
Protection class |
IP 51 |
|
Standard interfaces
- Serial interface, front
- Serial interface, rear
- Analog voltage output
- TTL control I/O
|
RS-232, max. 115 kbit/sec
RS-232 or RS-422, max 230 kbit/sec
± 10 Volts, scaleable, 16 bit D/A
4 TTL outputs / 3 TTL inputs |
|
Optional interfaces |
|
|
|
LSV-I-001: Opto-insulated encoder output, output frequency free programmable up to 500 kHz, 5 V to 24 V level |
- Parallel output interface
|
LSV-I-002: Opto-insulated interface, format 18 data bit, plus 1 sign bit |
|
|
LSV-I-010: 0 (4) to 20 mA, scaleable, 16 bit D/A, active and passive mode |
|
|
LSV-I-020: Process interface with "Laser Ready" signal extends the standard TTL control interface by opto-insulated inputs and outputs. 4 outputs for 24 V, 400 mA (Voltage has to be supplied externally) and 3 inputs for 24 V level |
|
|
LSV-I-100: interface for direct LAN integration (available 2004) |
- External Display interface
|
LSV-I-040: RS-422 interface for external large-size display unit |
|
"Material Present" function |
LSV-I-004: "Material Present" function for detection of material entering the LSV measurement volume. Including output of the "Material Present" signal. This option is recommended for all applications requiring a start/stop trigger and where no external light barriers can be used |
|
Compatibility |
Sensor Head LSV-065, Sensor Head LSV-026 |
|
Accuracy |
< 0.05 % of measured value for |v| > 60 mm/s |
|
Repeatability |
< 0.02 % of measured value |
|
Max. permissible acceleration |
< 20 m/s2 |
|
Signal delay |
< 5 ms (measured at the analog output) |
|
Signal capture time |
20 ms typically, dependent on signal quality |
| Output update rate |
1024/sec typically (update rate length at RS 232: 512/sec) |
