IVS-300 Industrial Vibration Sensor - Features

The IVS-300 is the first choice for non-contact measurement on ‘difficult’ surfaces with poor light scattering characteristics and for the resolution of low vibration amplitudes requiring high resolution. All range and filter settings are software configured via a serial interface, leaving no risk of accidental changes in key settings on the production line. Vibration signal output is via an analogue (± 4V BNC), or digital audio interface (SP-DIF).

	Features | Technical Data | Accessories | Download |

Key Features of the IVS-300 Industrial Vibration Sensor

• Robust and compact single box design (IP 64)
• eye-safe visible low power laser (Class II)
• Simple to install and operate
• Easy to integrate in test rig applications and existing control systems
• Advanced digital signal electronics for lowest noise combined with highest sensitivity
• 0.5 Hz to 22 kHz frequency response
• Velocity up to ± 500 mm/s (3 ranges)
• Analog velocity output and digital S/P-DIF audio interface compatible with VIBSOFT-SP and other acquisition systems supporting the S/P-DIF standard

The IVS-300 exploits the latest digital signal processing techniques to ensure accurate and repeatable measurement from uncooperative surfaces. It is the first choice for non-contact measurement on “difficult“ surfaces with poor light scattering characteristics and for the analysis of low vibration amplitudes requiring high resolution.
The IVS-300 is easily retrofitted into existing production lines because the laser interferometer optics and electronics are all contained within a single, compact and robust industrial housing (IP 64).
All range and filter settings are software configured via a serial interface, leaving no risk of accidental changes in key settings on the production line. Vibration signal output is via an analog (± 4V BNC), or digital audio interface (S/P-DIF).